A pasture clearing in dense fir and cedar forest above a calm saltwater inlet, rugged snow-streaked mountains rising behind.
Kitsap County, Washington Kitsap & the Olympic Peninsula

Barndominium Builders in Bremerton, Washington

Bremerton wraps around Sinclair Inlet and the Port Washington Narrows on the Kitsap Peninsula, and the land inside the city is mostly developed neighborhoods on city sewer and water, with little acreage left. A barndominium here is usually an infill project: a steel or pole barn home with a garage or hobby shop under the main roof, designed to the lot's setbacks and the City's zoning, which was updated in June 2025. The City of Bremerton Department of Community Development reviews the building permit, and every application now goes in online. For five acres or more, owners look outside the city to rural Kitsap County, where a well and septic system replace city utilities. We supply barndominium kits for owners who want to raise the shell with their own crew, and we build complete homes from site preparation to final inspection. A custom plan is the usual starting point on a Bremerton lot, since the shop door, the driveway grade and the side yards have to work before the rooms do. Send us the parcel and we will check the zone, the sewer connection and the City's published design loads first.

Bremerton at a glance

Principal county
Kitsap County
Building permit
City building department
Land use
City zoning, inside an urban growth area
Wastewater
Public sewer
Water
Public water system

Barndominium Kits and Pole Barn Homes in Bremerton

A kit suits an owner who wants to raise the shell with their own crew. A pole barn home sets its frame on posts and trusses (the engineering term is post-frame construction) and suits a wide, simple layout with a shop bay under the same roof; a metal building home uses a bolted steel frame. Which one fits your parcel comes down to the zoning, the site and the design values the local building office publishes, covered below.

Building a Barndominium in Bremerton: Permits, Zoning, Septic and Water

On rural land the zoning, septic and water answers often come before the building answer. Here is who decides each part in Bremerton, taken from the office or document that publishes it. Rules change, so check them again against your parcel before anything is drawn.

Who issues the building permit City building department

City of Bremerton Department of Community Development

Inside the city limits, the Department of Community Development handles building permits, and all permit applications and payments are made online. Counter hours are mornings, with appointments available through the day. The department notes a heavy permit volume from development within the city limits, with plans reviewed in the order received.

Source: Community Development, City of Bremerton (bremertonwa.gov)

Who decides the land use Inside an urban growth area

City of Bremerton Department of Community Development; Kitsap County in the unincorporated UGA

The City zones land inside its limits. Neighboring unincorporated land in Bremerton's urban growth area stays under Kitsap County until annexed, and the City says the most common reason owners petition to annex is to get municipal sewer and water. Annexation is limited to land inside the urban growth area boundaries.

Source: Annexation, City of Bremerton (bremertonwa.gov)

Sewer or septic Public sewer

City of Bremerton Wastewater Division; Kitsap Public Health District for septic

The Westside Wastewater Treatment Plant serves the entire city, fed by 40 pump stations and 268 grinder pump stations, so most lots connect to sewer. The City does not handle septic systems: any property still on one deals with Kitsap Public Health District.

Source: Wastewater, City of Bremerton (bremertonwa.gov)

Where the water comes from Public water system

City of Bremerton Water Utility

Bremerton's water comes from the protected Union River headwaters watershed, which the City owns, and from 11 groundwater wells in the Bremerton area. The City's service map shows which parcels it serves; land beyond it usually depends on another water system or a private well.

Source: Drinking Water, City of Bremerton (bremertonwa.gov)

City design criteria
The City's adopted-codes sheet (revised January 2025) lists the design values for a Bremerton building: a 30 pounds per square foot ground snow load, a 110 mph ultimate wind design speed with exposure B, seismic design category D2 and a 12-inch frost depth.

Source: Codes Adopted by the City of Bremerton (bremertonwa.gov)

Watershed (WRIA 15)
Ecology's Kitsap watershed plan (December 2024) says WRIA 15 covers the entire Kitsap Peninsula and surrounding islands, including Kitsap County. That is the watershed rule that applies if a lot outside the city water system would need a new well.

Source: Watershed Restoration and Enhancement Plan, WRIA 15 Kitsap Watershed, Department of Ecology (apps.ecology.wa.gov)

Building on land near Bremerton

Check the zone and the utility map before anything else. Most Bremerton lots already have sewer and city water, so the site work is the side sewer, the water service and a driveway that can take a shop door. A lot that slopes toward the water can need extra excavation and retaining walls, and the permit application asks whether the parcel is within 200 feet of a shoreline, where shoreline rules come in. Framing and footings follow the City's published snow, wind and seismic values. If the lot will not take a pole barn home with the shop you want, the rural zones in Kitsap County are the place to look.

Other places in this part of Washington

Have land in or near Bremerton? Tell us about the parcel and what you want on it, and we will check it against the local rules before anything is drawn.

Building in Bremerton: questions

Start the survey
How much does it cost to build a barndominium in Bremerton?
On a Bremerton lot, grading on a slope, the sewer and water connections and framing for the City's 30 psf ground snow load and seismic category all feed into the price, and the lot's width limits how large the shop bay can be. We quote against the actual parcel. Our barndominium cost guide sets out sourced per-square-foot ranges and the items that push a Bremerton price up or down.
Do I need a building permit for a barndominium in Bremerton?
Yes. A barndominium used as a home is a new single-family residence, and inside the city limits the City of Bremerton Department of Community Development issues the permit through its online portal. If the parcel is in the unincorporated area around the city, Kitsap County issues it instead. Our permitting service handles the drawings and the submittal.
Where can I find acreage for a barndominium near Bremerton?
Mostly outside the city. The rural residential zones in Kitsap County allow one home per five acres, and parcels there usually rely on a private well and septic system approved by Kitsap Public Health District. Inside Bremerton, look for a larger lot at the edge of a neighborhood and design the shop into the house.

Other places near Bremerton

Nearby places with their own pages. Across a city limit or a county line the permit office, the zoning, the septic program and the water rules can change, so each is covered separately.

Building in Bremerton?

Start with the survey. Tell us where the land is and what you want on it, and we will come back with which offices decide it, what the zoning allows, and a plan to fit.